The G80 is a different kind of cleaning tool from the rest of the ABIR range. It is a corded, handheld wet and dry carpet cleaner rather than an autonomous robot, which means there is no app to pair, no Wi-Fi to connect, and no map to build. First-time setup is entirely physical: filling tanks, attaching the right head, and understanding how the wet and dry functions work together before you start on your first stain or spill. This guide walks through that setup so your first clean goes smoothly rather than becoming a session of figuring things out as you go. If you have used a robot vacuum before and are picking up the G80 as a second tool for spot cleaning and stains, expect a genuinely different kind of setup experience, one built around hands-on use rather than automation.
What's in the Box and First Steps
Unpack the G80 and check you have the main handheld unit, its power cord, the cleaning head attachment, and the clean and dirty water tanks, which are usually separate compartments or removable units depending on the exact configuration. Familiarise yourself with where each tank sits and how it locks into place before you fill anything, since trying to identify parts for the first time while also managing a spill is far more frustrating than a dry run beforehand. A few minutes spent simply handling the unit before it is plugged in and running goes a long way toward a confident first clean.
Because the G80 is corded rather than battery powered, there is no initial charge to wait through. You can use it as soon as it is assembled and plugged in, which is one of the trade-offs of a corded design: less setup time, but you will need to work within reach of a power outlet or use an extension lead for larger rooms.
Check the cleaning head is fully and securely attached before running the unit for the first time. A loosely fitted head can affect both suction and the spray pattern of the wet cleaning function, and it is a common cause of underwhelming results on a first attempt that has nothing to do with the machine's actual capability.
Take a moment to also locate the release buttons or catches for the tanks and head before you start using the unit under time pressure, such as during an actual spill. Knowing exactly where to press or twist ahead of time turns what could be a fumbling few seconds into a quick, confident motion when you actually need it.
Filling the Clean Water Tank
The G80 holds 1,800ml combined across its wet and dry functions, and the clean water tank is what supplies the wet cleaning solution during use. Fill it with clean water, and add a cleaning solution formulated for carpet and upholstery cleaners specifically if you plan to tackle a stain rather than just general dirt, following the dilution guidance on the solution's own packaging rather than guessing at a ratio.
Avoid overfilling the tank past its marked maximum line. Overfilling can cause leaking during use or affect how evenly the unit dispenses solution through the cleaning head, neither of which makes for a better clean. Check the tank seats securely and clicks or locks into place before switching the unit on, since a tank that is not fully seated can leak during operation.
If you are treating a specific stain rather than doing a general clean, it is worth reading the cleaning solution's own instructions in full before you start, since some solutions recommend a short dwell time on the stain before extraction, while others are designed to be applied and immediately extracted in the same pass. Getting this detail right makes a meaningful difference to how well set-in stains actually lift.
Your First Clean
Start on a small, inconspicuous section of carpet or upholstery rather than diving straight into the middle of a visible stain, particularly if you are using a cleaning solution for the first time on that specific fabric. This lets you confirm the fabric responds well before committing to the full area.
Engage the wet function to dispense solution while pulling the head slowly across the surface, then use the dry or suction function to lift the moisture and loosened dirt back into the dirty water tank. On many wet and dry cleaners, including designs like the G80, these two functions can typically be used together in a single pass or separately depending on whether you are applying solution or extracting it, so check your specific model's control layout before your first run to understand which button or trigger does which.
Work in overlapping, controlled passes rather than rushing across a large area quickly. Slower, deliberate passes generally lift more dirt and moisture per pass than fast ones, which matters more for stain removal than raw speed does.
Pay attention to how the carpet or fabric feels immediately after your first pass. If it feels considerably wetter than expected, you are likely applying more solution than the fabric needs, and easing off slightly on subsequent passes will avoid over-wetting, which can extend drying time significantly and, in some cases, leave a slight residue behind once the area dries.
Emptying and Rinsing After Use
Once you have finished cleaning, empty the dirty water tank promptly rather than leaving it sitting in the unit. Dirty water left standing can develop an unpleasant smell surprisingly quickly, and rinsing the tank out immediately after use, even with a quick rinse under a tap, prevents this from becoming a recurring issue.
Rinse the cleaning head itself under running water to remove any trapped debris or solution residue, and check the hose or connecting tube, if accessible, for any blockage before your next use. Let all removable parts air dry fully before reassembling and storing the unit, for the same reasons dampness is worth avoiding on any cleaning equipment: trapped moisture encourages odour and mould over time.
Wipe down the exterior of the main unit and the power cord with a dry cloth as part of this routine as well, particularly if you have been cleaning up a spill that reached beyond the immediate carpet area. A quick wipe-down after every use keeps the unit looking and functioning well over time, and it takes barely any extra effort once tank rinsing and head cleaning are already part of the routine.
Using It Across Different Surfaces
The G80's wet and dry function is built primarily around carpet and upholstery, but a handheld unit like this often gets used more broadly around a home.
Stairs and Upholstered Furniture
The handheld, corded design makes stairs and furniture considerably more practical to clean than a full-sized upright machine would be, since you are not manoeuvring a larger unit into an awkward space. Keep the same slow, overlapping pass technique here as you would on open carpet.
Car Interiors
A long enough extension lead, or a vehicle with an accessible power source, makes the G80 workable for car seats and carpets too. Just be mindful of cord placement and length in a confined space, and check the vehicle's own upholstery care guidance before applying any cleaning solution, since some fabrics have specific care requirements. Working in short sections rather than trying to cover an entire seat in one continuous pass also tends to give better control in the tighter, more angled spaces a car interior presents.
Spot Cleaning Versus Full-Area Cleaning
For a single fresh spill, the wet and dry functions used together in one pass are usually enough. For a full-room clean or a set-in stain, a first pass with solution followed by a second pass focused purely on extraction tends to lift more than trying to do both in a single hurried pass. Whichever approach you take, finishing with a dry extraction pass over the treated area, even after the wet pass looks complete, helps pull out any remaining moisture and speeds up overall drying time.
Frequently Asked Questions
Do I need to dilute the cleaning solution, or can I use it straight?
Follow the dilution instructions on your specific cleaning solution's packaging rather than using it undiluted. Solutions formulated for carpet and upholstery cleaners are generally designed to be mixed with water at a specific ratio, and using it at full strength can leave residue behind that is harder to rinse out than it is to prevent in the first place.
Can I use the G80 without any cleaning solution, just water?
Yes, plain water works for general refreshing of carpets and light dirt, though a proper cleaning solution will generally lift set-in stains and odours more effectively than water alone. For routine maintenance cleaning rather than stain treatment, water on its own is a reasonable and gentler option.
Why is suction reduced partway through a clean?
Check whether the dirty water tank has reached its capacity, since a full tank can reduce suction performance until it is emptied. Also check that the cleaning head is not obstructed by a build-up of debris or hair, which can restrict airflow in the same way a clogged filter would on a different type of vacuum.
Is the G80 safe to use on all carpet types?
Most carpet types tolerate wet cleaning well, but certain delicate or natural fibre carpets and rugs may have specific manufacturer care instructions that recommend against wet cleaning methods entirely. Check any care labels or manufacturer guidance for your specific carpet or rug before your first use, particularly for anything unusually delicate or expensive.
How long does a carpet take to dry after using the G80?
This depends on how much moisture was applied, room ventilation, and ambient humidity, so there is no single fixed drying time. Opening a window or running a fan in the room afterwards speeds up drying, and it is worth keeping foot traffic off a freshly cleaned area until it feels dry to the touch, since walking on damp carpet can press dirt back in from footwear. In rooms with poor airflow, a portable fan aimed at the treated area is often the single most effective way to cut drying time down noticeably.
Does the G80 need any Wi-Fi setup or an app?
No. The G80 is a corded, manually operated handheld cleaner with no smart features, app connection, or Wi-Fi requirement. Setup is entirely physical: filling tanks, attaching the head, and plugging it in, with none of the account creation or network pairing steps that ABIR's robot vacuums require.
How do I store the G80 between uses?
Store it with both tanks emptied and fully dry, rather than leaving any water sitting in either tank between uses. Coil the power cord loosely rather than tightly, since tight, repeated coiling in the same direction can stress the cord over time. A dry cupboard or storage area away from direct heat sources is generally suitable, and there is no charging dock or battery-related storage consideration to think about, unlike ABIR's cordless and robotic products.
Final Thoughts
The G80's first-use setup is simpler than a robot vacuum's in some ways, since there is no app or network pairing involved, but the physical steps of filling tanks correctly, checking the head is properly attached, and rinsing everything out after use matter just as much for getting good results from the start. Take the extra few minutes on your first clean to test on a small area and get familiar with the controls, and the rest becomes routine quickly. Once the initial setup and first clean are behind you, ongoing use is largely a matter of filling, cleaning, and rinsing in the same order each time, which most people settle into within their first two or three sessions. If you need replacement heads or cleaning solution, our accessories range and the G80 product page are good places to check compatible options, and our wider accessories collection covers care essentials for the rest of the ABIR range too.
0 comments